7041700_m

Having a clogged kitchen sink can be a major inconvenience and a health hazard when it’s left unattended. Over time, materials such as mineral build-up, hair, food wastes, and small objects can accumulate in the pipes underneath a sink. To remove a blockage and return plumbing in Oklahoma City, OK to full use, apply the following tips and actions.

Use Undiluted Bleach for Clog Removal

A simple and effective way to remove a kitchen sink blockage is to use 12 to 18 ounces of undiluted bleach. Pour this chemical directly into the drain of your sink. Undiluted bleach can be added to both sides of a sink with two bowls. Do not allow the drain to sit in the drain. Doing this can cause damage to the plumbing lines. Instead, after pouring the bleach down the drain, run a steady stream of hot water for about two to three minus. A second attempt can be done to totally dissolve the clog.

Use a Plunger to Dissolve a Plumbing Blockage

When undiluted bleach fails to remove a clog, implement a plunger. First, apply a liberal amount of petroleum jelly to the underside of plunger’s lips. Doing this will help the plunger form a tight seal over the drain. Press the plunger to the side of the sink’s wall near the top of the sink. Slowly slide the plunger down until it covers the entire opening of the drain. Rapidly move the plunger up and down 8 to 10 times. Make sure the plunger remains in contact with the surface of the sink. Using fast strikes will help build the force necessary to remove a clog. After the tenth strike, quickly pull up on the plunger. This can be attempted a second time when a clog still seems to be present.

When the above-mentioned actions fail to produce a successful result, it’s a good idea to call an expert to check out your kitchen plumbing in Oklahoma City, OK. The plumbing specialists at Drabek & Hill Inc. strive to offer enhanced services for Oklahoma City and the surrounding Metro area. Please visit the website of this company to learn about its services.